End User Product Specification

Sun Industrial Dome MOUSE-TRAK Trackball
Model J-SUNID

1.0   Scope:
This specification describes the functional, physical, and environmental characteristics of the Sun MOUSE-TRAK Industrial Dome.

2.0   Functional Specifications:
2.1 Resolution: 8-bit ADC
2.2 Input Switches: Three (3)
2.3 Interface: SUN mouse, 1200 baud asynchronous
2.4 Connector: 8-Pin Mini-DIN Male
2.5 Pin Assignments: Pin 2 = Common
Pin 3 = +5V
Pin 4 = DATA
All others = NC
2.6 Compatibility: Mouse-Systems protocol, 5-byte
2.8 Switches: Mechanically limited, break resistant
2.9 Cable: 96"+-0.5"
2.10 Power Consumption: Average: 10mA

3.0   Mechanical Specifications:
3.1 Dimensions: Approximately 4"wide x 8"long
3.2 Weight: 14 oz.
3.3 Body Material: Glass filled Xenoy thermoplastic, black
3.4 Dome Material: Industrial grade silicone
3.5 Dome Hardness: 40 durometer
3.6 Tracking Force: 100g/mm, typical
3.7 Dome Load: 250 lbs. maximum downward
3.9 Hand Pad: Injection-molded vinyl, black

4.0   Environmental Specifications:
4.1 Operating Temperature: 0 to +50 degrees Celsius
4.2 Storage Temperature: -20 to +60 degrees Celsius
4.3 Humidity: 0 to 95% non condensing

6.0   Documentation:
Included instruction manual

7.0   Labeling:
Standard MOUSE-TRAK labeling

8.0   Packaging:
Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification

9.0   Special Features:
9.1 Right/Left-handed modes: Yes. See manual for programming instructions
9.2 Programmability:
Middle Key:
The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click. See manual for programming instructions.
Right (Secondary in right-handed mode) Key:
The right key may be set for either secondary click or secondary click-and-drag. See manual for programming instructions.
Center Position:
The neutral (center) position for the dome can be reset by chording the right and speed keys.
Programming Note:
Programming will reset to factory default if the MOUSE-TRAK receives a reset signal from the host computer.

10.0   Certifications:
10.1 CE Mark: EU Declaration of Conformity (431K PDF)

Model Drawings
Internet Explorer (PC):Right click on the desired file, select "Save Target As", and follow the directions for saving to disk.
Netscape Navigator (PC/X-Windows):Right click on the desired file, select "Save Link As", and follow the directions for saving to disk.
Internet Explorer (Mac):Click and hold on the desired file, select "Download to Disk", and follow the directions for saving to disk.
Netscape Navigator (Mac):Click and hold on the desired file, select "Save this link as", and follow the directions for saving to disk.
Description Available Formats
AutoCAD
(DWG)		 Portable Network Graphics
(PNG)
Unit Assembly 1000250a.dwg (73K) 1000250a.png (39K)
Panel/Table Mounting Instructions 1000727_.dwg (56K) 1000727_.png (35K)
Cable 1000115_.dwg (56K) 1000115_.png (49K)

All AutoCAD drawings, PNG images of AutoCAD drawings, and MOUSE-TRAK specifications are ©1998 ITAC Systems, Inc. All Rights Reserved.