End User Product Specification

Sun MOUSE-TRAK Professional Trackball
Model B-SUNMD

1.0   Scope:
This specification describes the functional, physical, and environmental characteristics of the Sun MOUSE-TRAK Professional.

2.0   Functional Specifications:
2.1 Resolution: 192 to 576 pulses per revolution of the ball.
2.2 Input Switches: Three (3)
2.3 Interface: SUN mouse, 1200 baud asynchronous
2.4 Connector: 8-Pin Mini-DIN Male
2.5 Pin Assignments: Pin 2 = Common
Pin 3 = +5V
Pin 4 = DATA
All others = NC
2.6 Compatibility: Mouse-Systems protocol, 5-byte
2.7 Switches: Mechanically limited, break resistant
2.8 Cable: 60"+-0.5", double shielded, 100% coverage
2.9 Power Consumption: Idle: 8mA
Max: 12mA

3.0   Mechanical Specifications:
3.1 Dimensions: Approximately 4"wide x 8"long
3.2 Weight: 1.2 lbs.
3.3 Body Material: ABS, Beige
3.4 Ball Material: Cast Phenolic Resin
3.5 Ball Hardness: Rockwell H 85
3.6 Tracking Force: 1.5 oz. maximum, 0.5 oz. typical (15g)
3.7 Ball Load: 25 lbs. maximum downward
3.8 Ball Speed: 500 RPM maximum
3.9 Hand Pad: Injection-molded vinyl, grey

4.0   Environmental Specifications:
4.1 Operating Temperature: 0 to +50 degrees Celsius
4.2 Storage Temperature: -20 to +60 degrees Celsius
4.3 Humidity: 0 to 95% non condensing

5.0   Accessories:
None

6.0   Documentation:
Included instruction manual

7.0   Labeling:
Standard MOUSE-TRAK labeling

8.0   Packaging:
Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification

9.0   Special Features:
9.1 Right/Left-handed modes: Yes. See manual for programming instructions
9.2 Programability:
Middle Key:
The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click. See manual for programming instructions.
Right (Secondary in right-handed mode) Key:
The right key may be set for either secondary click or secondary click-and-drag. See manual for programming instructions.
Note:
Programming will reset to factory default if the MOUSE-TRAK receives a reset signal or power down from the host computer.

10.0   Certifications:
10.1 CE Mark: EU Declaration of Conformity (431K PDF)

Model Drawings
Internet Explorer (PC):Right click on the desired file, select "Save Target As", and follow the directions for saving to disk.
Netscape Navigator (PC/X-Windows):Right click on the desired file, select "Save Link As", and follow the directions for saving to disk.
Internet Explorer (Mac):Click and hold on the desired file, select "Download to Disk", and follow the directions for saving to disk.
Netscape Navigator (Mac):Click and hold on the desired file, select "Save this link as", and follow the directions for saving to disk.
Description Available Formats
AutoCAD
(DWG)		 Portable Network Graphics
(PNG)
Unit Assembly 1000250a.dwg (73K) 1000250a.png (39K)
Cable 1000790b.dwg (57K) 1000790b.png (24K)

All AutoCAD drawings, PNG images of AutoCAD drawings, and MOUSE-TRAK specifications are ©1998 ITAC Systems, Inc. All Rights Reserved.