End User Product Specification

PS/2 Mouse-Port MOUSE-TRAK Professional Trackball
Model B-5XXMP and B-5HPMP

1.0   Scope:
This specification describes the functional, physical, and environmental characteristics of the PS/2 Mouse-port MOUSE-TRAK Professional.

2.0   Functional Specifications:
2.1 Resolution: 192 to 576 pulses per revolution of the ball.
2.2 Input Switches: Three (3)
2.3 Interface: IBM PS/2
2.4 Connector: 6-Pin Mini-DIN Male
2.5 Pin Assignments: Pin 1 = PS/2 Data
Pin 2 = NC
Pin 3 = Common
Pin 4 = +5V
Pin 5 = PS/2 clock
Pin 6 = NC
2.6 Compatibility: Microsoft PS/2 Mouse Protocol, Logitech PS/2 Mouse Protocol
2.7 OS Certifications: Microsoft Windows 95, Microsoft Windows NT 4.0
2.8 Switches: Mechanically limited, break resistant
2.9 Cable: 96"+-0.5", double shielded, 100% coverage
2.10 Power Consumption: Idle: 8mA
Max: 12mA

3.0   Mechanical Specifications:
3.1 Dimensions: Approximately 4"wide x 8"long
3.2 Weight: 1.3 lbs.
3.3 Body Material: ABS, Beige
3.4 Ball Material: Cast Phenolic Resin
3.5 Ball Hardness: Rockwell H 85
3.6 Tracking Force: 1.5 oz. maximum, 0.5 oz. typical (15g)
3.7 Ball Load: 25 lbs. maximum downward
3.8 Ball Speed: 500 RPM maximum
3.9 Hand Pad: Injection-molded vinyl, grey

4.0   Environmental Specifications:
4.1 Operating Temperature: 0 to +50 degrees Celsius
4.2 Storage Temperature: -20 to +60 degrees Celsius
4.3 Humidity: 0 to 95% non condensing

5.0   Accessories:
None

6.0   Documentation:
Included instruction manual

7.0   Labeling:
Standard MOUSE-TRAK labeling

8.0   Packaging:
Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification

9.0   Special Features:
9.1 Right/Left-handed modes: Yes.
9.2 Programability:
Middle Key:
The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click.
Right (Secondary in right-handed mode) Key:
The right key may be set for either secondary click or secondary click-and-drag.
Programming Note:
Programming will reset to factory default if the MOUSE-TRAK receives a reset signal from the host computer.

10.0   Certifications:
10.1 CE Mark: EU Declaration of Conformity (431K PDF)

Model Drawings
Internet Explorer (PC):Right click on the desired file, select "Save Target As", and follow the directions for saving to disk.
Netscape Navigator (PC/X-Windows):Right click on the desired file, select "Save Link As", and follow the directions for saving to disk.
Internet Explorer (Mac):Click and hold on the desired file, select "Download to Disk", and follow the directions for saving to disk.
Netscape Navigator (Mac):Click and hold on the desired file, select "Save this link as", and follow the directions for saving to disk.
Description Available Formats
AutoCAD
(DWG)		 Portable Network Graphics
(PNG)
Unit Assembly 1000250a.dwg (73K) 1000250a.png (39K)
Cable 1000097f.dwg (67K) 1000097f.png (26K)

All AutoCAD drawings, PNG images of AutoCAD drawings, and MOUSE-TRAK specifications are ©2002 ITAC Systems, Inc. All Rights Reserved.